I figure the back cap should not rest or rub on the bumper when in the down position. Would it hurt anything to double up on the rubber pads on the rests so as to eliminate this. It is not rubbing bad but the paint on the bumper is gone and black marks on cap. Thanks for any help.

__________________
Caryl & Dave

2008 Chevy Silverado XLT w/10k Equil-i-zer Hitch
2006 Hi-Lo 27T

I would double-up the rubber bumbers on the outriggers, plus if needed replace the gray bumpers that are mounted on the underside of the top section.

__________________
Les & Patricia
2006 22ft towlite (replaces 97 21TL)
2006 Toyota tacoma pre-runner 4.0 L V-6 quad cab
w/ 98 chevy Powervision towing mirrors
2017 Chevy Silverado 1500 5.3 v8 (replaces Toyota)
2 Hobie mirage pedal drive kayaks

I had some rubbing inside, from the top on to the "wood" railing behind the sink in our trailer. I "thickened" the rear bumpers on the outriggers and there seems to be no ill effects.

- Jack

__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System, SoftStartRV mounted on A/C
2024 F150 Platinum FX4 3.5L PowerBoost SCrew