Hi all,

Is it OK to back up with the spring bars and sway control installed on the WDH? I have an older EAZ-Lift hitch.

Thanks,

__________________
Greg
2004 4x4 Chevy Tahoe
Former owner of a 2407T

It should be okay unless there is something quirky about that brand of hitch. Backing is no problem with my Reese hitch. People say to unhook the friction sway control, but I don't know why. I never have used one.

__________________
My Great Wife Joyce
2018 Jayco Jay Flight 21QB
Formerly owned 1705T and 2310H
2012 F150 4X4 SuperCrew EcoBoost w/Leer Cap
Reese WD Strait-Line Hitch
Amateur Radio K3EXU

Dont know about theEAZ hitch- on some with friction control i Hear tell you should disconnect when back and turning. Had a friend break his hitch this winter doin just that.

rick

__________________
2201 TL

2010 Nissan Titan king cab SE
4x4

Interesting. There's no need to do anything to an Equil-I-Zer hitch when backing.

I wonder if you could find an owner's manual online for your EAZ-Lift hitch? I bet there would be a note about this in the manual if it was important.

And, you might look for an FAQ on EAZ-Lift's website (assuming there is one).

- Jack

__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System, SoftStartRV mounted on A/C
2024 F150 Platinum FX4 3.5L PowerBoost SCrew