Does anyone know what this is and where to find replacements?
It appears to be a gasket that is used to better secure the awning to the trailer. one fell off and i need to replace it.

Cheers!
-Matt

Attached Images

awning gasket.jpg (80.3 KB, 36 views)

Provided there are no other alternatives (?) ... the cheap Charlie in me suggests you get an old tire and cut a similar sized piece out of it.

__________________
2014 Ford F250 6.7 PS
formerly a HiLo TD2401
now an 08 Jayco Eagle

I agree, it's just a piece of hard foam material.

__________________
My Great Wife Joyce
2018 Jayco Jay Flight 21QB
Formerly owned 1705T and 2310H
2012 F150 4X4 SuperCrew EcoBoost w/Leer Cap
Reese WD Strait-Line Hitch
Amateur Radio K3EXU

A heavy duty flip-flop cut to size would work too. Beach

I don't know that a flip-flop would be "rigid" enough. That piece is really a "hard" kind of rubber, very much like a tire. It's the same stuff that's on the outriggers, I think.

I replaced my outrigger bumpers on one side with hocky puck halves that I sawed in half across their diameter, so they would not be too high. (Reduced the thickness by 1/2.) I did this because the original bumpers were not installed properly (they were too far out) and I wanted something larger. That quality rubber seems about right.

- Jack

__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System, SoftStartRV mounted on A/C
2024 F150 Platinum FX4 3.5L PowerBoost SCrew

Some of the flip flops I have are a hard rubber.

I lost mine too. Need to get a replacement on soon. Those mounts started digging into the side of the trailer. I've filled the gouges in with fiberglass. Gotta install before I take trailer out.

__________________
"Ruben"
2404T, 2003 2500HD 4X4 GMC Sierra SLT Crew Cab w/Astro camper shell and 2003 Chevy Tahoe LE 4X2
Far West Texas