Does anyone know where i can find a new flap seal for crankout window. Seal on top of top glass seems to have shrunk, 1 inch gap on each end of glass. allows water to enter around window. thanks for any help.
I filled mine with black silicone caulking cleaned off the excess with a finger swipe and it looks great.
I also trimmed and scraped out the old caulking around the frame on the outside, it was cracked. Then I went around the whole exterior of the frame with almond silicone caulking, it was a dead ringer for a match.
The upper "Creation" window seals on my 2207 TowLite have shrunk about an inch and a half from exposure to the sun. After doing a lot of Googleing on the WEB I found a supplier for the replacement seal: Creation window parts. The part you want is the C4714024000 Top Vent Seal. I'm anxiously waiting for them to be delivered.
PS: Creation Windows is no longer in business
__________________
John
2007-22T TowLite 50th Anniversary
2008 Nissan Frontier SE 4X4 Crew Cab, Snug Top
*bump* my window seals must have shrunk also as they look just like the picture above. Do I just order a new seal?
As old as the above posts are, you may not be able to find any of that type seal. I'll do some looking.
__________________
My Great Wife Joyce
2018 Jayco Jay Flight 21QB
Formerly owned 1705T and 2310H
2012 F150 4X4 SuperCrew EcoBoost w/Leer Cap
Reese WD Strait-Line Hitch
Amateur Radio K3EXU
As old as the above posts are, you may not be able to find any of that type seal. I'll do some looking.
I went through Midget Trailer to get my window seals and it did take several weeks to get them. All of my window seals had shrunk so I started with the larger windows first , replacing the old seal, then I used the old seal on the smaller windows. The replacement process is much easier when the seals are hot from sun heat.This was done late last year
__________________
__________________
Fantastic Wife
2005 Toyota Tundra V-8 4.7L
2705T Tow Lite
1999 21T Tow Lite
Window seal shrunk
Linear Mode
