I believe they ARE standard. I bought some attachment hardware online about 4 years ago to replace parts of mine that I'd broken. I don't know of a good source for awnings offhand, but I bet an internet search would yield results.
You could also ask JR Repair for help.
You could also ask JR Repair for help.
RCREYES
Senior Member
I went to Camping World and another local RV shop to get a quote. I gave them all the numbers I could find on the assembly. One of them was the magic number. They even knew it was for a Hi-Lo. So, they are most likely specific to our trailers.
Rich, what are we talking about? Are you saying the roller is shorter or is it that the length of the fabric on the roller is shorter?
I suspect I was confused in my answer to the OP's question and am sorry if I gave a misleading answer.
Good grief! I just re-read the original post and found I WAS confused! Senior Moment again! How the heck did I miss the word "fabric"? I AM sorry!
- Jack
I suspect I was confused in my answer to the OP's question and am sorry if I gave a misleading answer.
Good grief! I just re-read the original post and found I WAS confused! Senior Moment again! How the heck did I miss the word "fabric"? I AM sorry!
- Jack
Last edited:
garyk52
Senior Member
From the groove at the top of the camper to the first groove in the roller is 81 inches, 3 1/2 to the second groove, then a 7 inch valance, just went out and measured. Boy is it cold out.
Last edited:
Sorry, I meant the length of the fabric from the mount to the roller when extended. I look at that as the length and the width is the what's front to back on the mount. That is confusing. I guess just one word doesn't really explain that.
Not to worry, Rich. I completely misunderstood the original post. *DUH*.
- Jack
- Jack
Treeclimber
Senior Member
I'm sure the length (from top to roller barrel) is unique to Hi Los. Mine is definitely a replacement and if I FULLY deploy the awning, the support rods come apart. I've measured and found the fabric is about one foot too long.
I've thought about replacing the fabric, but shortening it before install. Tough task, but my Huskie sewing machine can handle it. Bottom line for me, don't fully deploy!
I've thought about replacing the fabric, but shortening it before install. Tough task, but my Huskie sewing machine can handle it. Bottom line for me, don't fully deploy!
Qwerty-HILO
Advanced Member
I replaced my awning a few years ago with fabric only from an ebay seller. The fabric was regular length but I chose to leave it as such because, when the 'always exposed' section wears (as they all do), I'll cut the excess at that time & hopefully, double the life of my awning.
---------------------------
Towlite 2204
Dodge Ram 1500
---------------------------
Towlite 2204
Dodge Ram 1500
Hey ! Good ideal. ole dogs can learn new tricks.
Bigbar
Qwerty-HILO
Advanced Member
A caveat, Bigbar. If you take this route, your awning will (just about) extend fully but I don't recommend it as the bottom awning supports may bend inwards as mine did. So, if you're not fussed about the fabric's fringe being visible, just extend to the Hi-Lo length.
---------------------------
Towlite 2204
Dodge Ram 1500
---------------------------
Towlite 2204
Dodge Ram 1500
Thanks Querty ! I think i'll mark my main rafter arms and fabric just to remind me not to extend the awning to far. I'll be cutting off a part of my awing tube because it's bend in on on side also i can remount my brackets and arms in a different location. The awning had a tree jump out in front of it in a campground by the previous owner. LOL Thanks bigbar
sam-HILO
Senior Member
Awning repairs.
We got caught in a wind storm and it bent the arm of our carefree awning. I had the exploded parts for Carefree. They had the parts I needed. I called them a second time and they sent some small hardware N/C. Youtube has a video on awning repair. When we had our walls torn apart we were asble to reinforce where the awning bracked goes into the exterior side of the HiLo. Apiece of sttel was bolted in. That way the awning bracket had a good "stud" area to be firmly attached too.
We got caught in a wind storm and it bent the arm of our carefree awning. I had the exploded parts for Carefree. They had the parts I needed. I called them a second time and they sent some small hardware N/C. Youtube has a video on awning repair. When we had our walls torn apart we were asble to reinforce where the awning bracked goes into the exterior side of the HiLo. Apiece of sttel was bolted in. That way the awning bracket had a good "stud" area to be firmly attached too.
Qwerty-HILO
Advanced Member
Sam, our front top bracket has only one screw (came to us from the original owners that way, the screw was sheared). I often worry that it's gonna go one windy day. Looks like I should do the same.
Carefree Awning !
Hey Sam, i didn't know carefree had made awnings for Hilo's. I thought they were all A&E by Dometic. Have you got part numbers you could share. I don't know the difference, i'm thinking the Dometic is heavier gauge metal and the roller tube is bigger in dia.
bigbar
Hey Sam, i didn't know carefree had made awnings for Hilo's. I thought they were all A&E by Dometic. Have you got part numbers you could share. I don't know the difference, i'm thinking the Dometic is heavier gauge metal and the roller tube is bigger in dia.
bigbar
sam-HILO
Senior Member
My awning for 1990 25ft. Classic.
I think different years had different awning manufactures. In later years our dealer told us HiLo bought the toilet,awning,AC as a package deal from Dometic. Supply companies merged. I can't get into my HiLo right now as it is raining/snowing like cats and dogs. Take a picture of your HiLo awning and hopefully someone can identify the brand. Here is a post by Sam Shields retired HiLo service advisor. Re ataching awning bracket 7-31-2010 . This tells you how to make a sturdier repair.
I think different years had different awning manufactures. In later years our dealer told us HiLo bought the toilet,awning,AC as a package deal from Dometic. Supply companies merged. I can't get into my HiLo right now as it is raining/snowing like cats and dogs. Take a picture of your HiLo awning and hopefully someone can identify the brand. Here is a post by Sam Shields retired HiLo service advisor. Re ataching awning bracket 7-31-2010 . This tells you how to make a sturdier repair.
Thanks Sam, I know mine is a dometic by A&E. I wanted to put a crank out up grade on mine but the Dometic cost about 250 dollars compare to the Carefree at about 45 dollars crank out head only. The Carefree won;t fit the Dometic. So, if i can buy the whole thing, awning complete with fabric by Carefree thats what i would do if it's cheaper! Ebay has some good deals. But in order to check prices i need pert numbers. Bigbar
Similar threads
- hdrider211
- General Repairs, Modifications, Tips and tricks
- Replies: 1
- Views: 288
- sam-HILO
- Routine Maintenance & Service | Winterizing
- Replies: 1
- Views: 333
- SShankstr
- New Member Intros
- Replies: 2
- Views: 172
New posts
-
-
-
-
Forum Update - We're back! Ask your questions here.
- Latest: Shaihulud2090
Try RV LIFE Pro Free for 7 Days
- Ad-Free experience on this RV LIFE Community.
- Plan the best RV Safe travel with RV LIFE Trip Wizard.
- Navigate with our RV Safe GPS mobile app.
- and much more...
