Rear Shelf 8: support on road side wall. I do not have photo of new shelf being installed as it took the three of us. Once we removed the rear bed w

Rear Shelf 8: support on road side wall. I do not have photo of new shelf being installed as it took the three of us. Once we removed the rear bed w

  • 0
  • 0
Rear Shelf 7: support on passenger side wall. You can also note the many staples used to attach the shelves. Again, we snipped most of the staples w

Rear Shelf 7: support on passenger side wall. You can also note the many staples used to attach the shelves. Again, we snipped most of the staples w

  • 0
  • 0
Rear Shelf 6: The other side of the shelf was easier to remove as the shower wall was no longer an obstacle (due to staples).

Rear Shelf 6: The other side of the shelf was easier to remove as the shower wall was no longer an obstacle (due to staples).

  • 0
  • 0
Rear Shelf 5: another view of cut during the removal process.

Rear Shelf 5: another view of cut during the removal process.

  • 0
  • 0
Rear Shelf 4: You can see how we had to fold parts of the shelf down and away to release it from the staples. Again, we cut the staples with wire sni

Rear Shelf 4: You can see how we had to fold parts of the shelf down and away to release it from the staples. Again, we cut the staples with wire sni

  • 0
  • 0
Rear Shelf 3: In order to remove the shelf we had to cut the shelf with our circular saw in several places to allow removal. We did not want to damag

Rear Shelf 3: In order to remove the shelf we had to cut the shelf with our circular saw in several places to allow removal. We did not want to damag

  • 0
  • 0
Rear Shelf 2: View of other side. Prior to removing this shelf we unscrewed and removed the partition under the shelf that forms a wall for the storag

Rear Shelf 2: View of other side. Prior to removing this shelf we unscrewed and removed the partition under the shelf that forms a wall for the storag

  • 0
  • 0
Rear Shelf 1: Remove screws and moulding. This is view of roadside side of shelf. Photo taken from rear bed. Again, water damage in corners, etc.

Rear Shelf 1: Remove screws and moulding. This is view of roadside side of shelf. Photo taken from rear bed. Again, water damage in corners, etc.

  • 0
  • 0
Front Shelf 10. New Front Shelf Installed. Note that you must lift the top of the water heater vanity to do this due to angle of bed frame. Sorry no

Front Shelf 10. New Front Shelf Installed. Note that you must lift the top of the water heater vanity to do this due to angle of bed frame. Sorry no

  • 0
  • 0
Front Shelf 8: We then removed the bunk. Directions for this are included in the field fix kit paperwork. We found it easier to removed the front an

Front Shelf 8: We then removed the bunk. Directions for this are included in the field fix kit paperwork. We found it easier to removed the front an

  • 0
  • 0
Front Shelf 7 support we removed to cut staples.

Front Shelf 7 support we removed to cut staples.

  • 0
  • 0
Front Shelf 6: View of roadside. Notice the line on wall. We had to remove the shelf support so that we could remove staples, etc. Replace the supp

Front Shelf 6: View of roadside. Notice the line on wall. We had to remove the shelf support so that we could remove staples, etc. Replace the supp

  • 0
  • 0
Front Shelf 5: View over water heater with shelf removed. It is that vanity cover that will have to be loosened (unscrewed and some staples removed)

Front Shelf 5: View over water heater with shelf removed. It is that vanity cover that will have to be loosened (unscrewed and some staples removed)

  • 0
  • 0
Front shelf 4: To remove the shelf we had to cut it in half. After removing screws and staples we pulled shelf an inch or so and cut with a circular

Front shelf 4: To remove the shelf we had to cut it in half. After removing screws and staples we pulled shelf an inch or so and cut with a circular

  • 0
  • 0
Front Shelf 3: road side. This is view after removing moulding. It shows water damaged to the mdf board.

Front Shelf 3: road side. This is view after removing moulding. It shows water damaged to the mdf board.

  • 0
  • 0
Front Shelf 2: road side. These are the flat moulding that are stapled and glued. Remove them. We used a flat head screwdriver as they were water d

Front Shelf 2: road side. These are the flat moulding that are stapled and glued. Remove them. We used a flat head screwdriver as they were water d

  • 0
  • 0
Front Shelf 1: remove moulding (quarter round near water pump vanity and flat moulding stapled in corners and across end) Keep quarter round for repl

Front Shelf 1: remove moulding (quarter round near water pump vanity and flat moulding stapled in corners and across end) Keep quarter round for repl

  • 0
  • 0
CA

Replacing Roo Shelving Adjacent to Beds

Note: Start with last photo and view in reverse order. These photos show some of the work required to replace the shelving adjacent to the front and rear beds in a Rockwood Roo 23ss. Our son, a finish carpenter did the work while my wife and I assisted. Warning: when working on front shelf be aware of electrical wiring and water hoses. The clips holding the hoses and wires must be removed first.
Click to expand...
There are no comments to display.

Album information

Category
Forest River Albums
Album owner
camper22406
Date created
Item count
17
View count
21
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

CA

camper22406

Media items
17
Albums
1
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top