Left rear marked. A backing plate of 1/4 steel was fabricated for the second stud and inserted behind the large hole in the rail.
Finished hitch. You can see the 4 inches rear of wheel wells. The Bedrug was cut up and reinstalled in 3 pieces.
Left rear beacket installed. Each bracket was installed up against the bed-to-side joint weld interface. A 1-3/8 spacer between bracket and bed. Sto
Left front bracket installed. The position inside the frame rail for the bolt from the hitch rail is very limited by interferences. A fastening tab
Left rear marked. A backing plate of 1/4 steel was fabricated for the second stud and inserted behind the large hole in the rail.
Left front location marked
right front bracket in place
Right rear bracket in place. Installing this bracket and the one on the left required bending an interfering flange toward the rear just hidden by th
john o-ESC

Left rear marked. A backing plate of 1/4 steel was fabricated for the second stud and inserted behind the large hole in the rail.

There are no comments to display.

Media information

Category
Escape Forum category
Album
2016 Canyon short bed and 5.0 classic rig
Added by
john o-ESC
Date added
View count
59
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top