nikitis

Might wanna do a replacement wheel setup with modern wheels.

If going with 12v battery bank, be sure your 3000 watt inverter is a 12v. Configuration.

Welcome to the site and thanks for the pics. We love pics and videos here.

On a scale of 0-10 on rust with 10 being don't buy due to rust, and 0 being buy due to lack of rust. I give it a 6-7. Structurally it...

Depends on your heater. The lines should come out the front heater and go down the hall. You can drill two holes (Use rubber grommets...

Yeah I mean all you gotta do now is just weld and glue the body to the chassis of the truck. No conversions necessary.

Chuck recommends running them under the bus if you take his advice. I removed mine but kept the lines past the front heater to maintain...

Most ignore it. It's not terrible, you may lose a tiny bit but nothing to write home about. Should be fine as long as you insulate up...

You'll want to keep the axle as that distributes the weight better across your under floor. But jacks to axle.

Thanks for making your presence known. Send pics and prospects of buses if you want comments on the choices.

Not sure, in the one I saw it was an air device and a simple solenoid that would turn the air valve on the device above the door. There...

Look forward to pictures. God Speed!

Well if you are looking to do the full build the state of many buses won't matter too much because you'll be tearing a lot of it down...

Well I only have a manual door with handle, but from what I've read on here, someone was recently doing exactly what you want to do and...

And if you need 3 ports, buy two of them and daisy chain them lol!