Search results

  1. Xantrex Prosine 1000 mounted in compartment adjacent to the batteries right behind the entry door on our 378. Inverter is hard wired to the main AC p

    Xantrex Prosine 1000 mounted in compartment adjacent to the batteries right behind the entry door on our 378. Inverter is hard wired to the main AC p

    • NWJeeper
    • Media item
    • Comments: 0
    • Album: Battery Installation
    • Category: Forest River Albums
  2. Xantrex Inverter control panel inside motorhome. Mounted just above the motorhome control center which houses the slide, water pump and water heater

    Xantrex Inverter control panel inside motorhome. Mounted just above the motorhome control center which houses the slide, water pump and water heater

    • NWJeeper
    • Media item
    • Comments: 0
    • Album: Battery Installation
    • Category: Forest River Albums
  3. 1" Angle iron was laid out to hold the 4 batteries and welded together. 3/16" plate was cut for the side and is welded to the frame to hold the angle

    1" Angle iron was laid out to hold the 4 batteries and welded together. 3/16" plate was cut for the side and is welded to the frame to hold the angle

    • NWJeeper
    • Media item
    • Comments: 0
    • Album: Battery Installation
    • Category: Forest River Albums
  4. A scrap piece of 1"x2" tube was welded to the front of the battery rack and then 1.5" wide 3/16" flat bar was welded to this and up to the frame above

    A scrap piece of 1"x2" tube was welded to the front of the battery rack and then 1.5" wide 3/16" flat bar was welded to this and up to the frame above

    • NWJeeper
    • Media item
    • Comments: 0
    • Album: Battery Installation
    • Category: Forest River Albums
  5. 4 of my 6 volt Trojan T-125s under the main step. Factory battery tray was cut from frame using a plasma cutter and a new tray was fabricated to hold

    4 of my 6 volt Trojan T-125s under the main step. Factory battery tray was cut from frame using a plasma cutter and a new tray was fabricated to hold

    • NWJeeper
    • Media item
    • Comments: 0
    • Album: Battery Installation
    • Category: Forest River Albums
  6. Closer detail of battery installation

    Closer detail of battery installation

    • NWJeeper
    • Media item
    • Comments: 0
    • Album: Battery Installation
    • Category: Forest River Albums
  7. [No title]

    [No title]

    • NWJeeper
    • Media item
    • Comments: 0
    • Album: Battery Installation
    • Category: Forest River Albums
  8. Angle iron was welded between the front rail and frame rail to hold batteries. Short sections of angle iron were welded to the front rail to hold bat

    Angle iron was welded between the front rail and frame rail to hold batteries. Short sections of angle iron were welded to the front rail to hold bat

    • NWJeeper
    • Media item
    • Comments: 0
    • Album: Battery Installation
    • Category: Forest River Albums
  9. Battery Installation

    Battery Installation

    Photos of my battery and inverter installation. 6-Trojan T-125 batteries. Two are up front behind main grill and 4 under step in a custom holder that replaced the factory 2-battery tray.
    • NWJeeper
    • Album
    • Comments: 0
    • Category: Forest River Albums

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top