Both of the yellow wires from the converter go to but connectors and to the top terminal on the fuse board
The black battery and the red wire from the master switch go to the bottom bat terminal
Based on the wiring diagram it looks like the converter wires should be connected to the black...
There are no fuses back there
Both of the yellow wires from the converter go to but connectors and to the top terminal on the fuse board
The black battery and the red wire from the master switch go to the bottom bat terminal
Based on the wiring diagram it looks like the converter wires...
The converter in my ELX-45 appears to have died.
I have researched all the replacements and the reviews keep mentioning cheap plastic enclosures.
Since mine still has one open 120v breaker spot and 3 open 12v fuses I do not need to add any additional spots.
After looking at the assembly I...
It’s an ELX-45
All the fuses look and test good and the circuit breaker is on
Does the monitor show charging with a fully charged battery
Any other things to check?
My 12v converter appears to have stopped charging the battery. I went out to go camping recently and I noticed that the batteries were not charging and were almost dead. The batteries are a pair of group 31 deep cycle batteries that were new last April. I pulled the batteries and had the dealer...
I am looking for a source for the rubber bumpers that the top rests on when it is down
I am looking for both the black 2” square ones, that mount to the out riggers, and the skinny grey ones that mount to the top
That spec is probably for a dry empty trailer.
How much stuff do you have in the trailer
What I would do is download the manufactures specs on the axles and then you will need to crawl under the trailer to check how the trailing arm is sitting
You can also add spacers between the axle and...
I have used mine with an iPod in the past and it does work but I was thinking about upgrading it to a modern one with a built in DVD player
This is what is in my 2305
I raised the sewer connection on my 2305 so that skid bar is now only 5” below the the frame rail. I have never had an issue draining the tanks in the 4 plus years since I performed this modification.
The skirting on trailer has been removed so that is not an issue
My trailer has lived on top...
Check the bars attached to the frame that support the top when it is in the down position.
I have a similar situation at the bathroom wall on the passenger side and I believe it happened when the support failed.
I repaired and reinforced the support 5 years ago but have not fixed that dinette...
I am interested in the awning frame if you can hold it for me.
how long is the awning?
Unfortunately since the tractor show has been canceled in Tulare do not have any immediate plans to go up there
Remember that you only have a total of 30 amps to use. Also do not hide any splices. I you have to extend the wire simply cut it where you can add a junction box and run from there. The trailer wiring is very similar to house wiring.
If you are running a lot of electrical stuff it is a good...
On my 2305 there are wire nuts in the wire bundle under the cloth covering. I had a similar issue and found the ground was loose in the wire but. I took it apart and reinstalled the wire but and everything worked.
On my trailer the three position switch does not affect the lights or fans but it...
I have a 2305 For the last three years
My advice is to inspect it carefully before purchase including all of the Cables and pulleys in both the up and down position.
When raising or lowering the top the trailer needs to be leveled by the wheels and tongue.
Also make shore everything is put...
Is there an easy way to disable the onboard battery charger when hooked to a generator?
My Cummins Onan QD 7.5 is getting a code 27 and one of the possible causes is interference with two 12 volt charging sources.
One source is the generators onboard charger
The second source is the HI-LOs...