Search results

What is the tow vehicle you are using. I have one and it's loaded with all sorts of extra gear probably as the very least 1000 lbs and my 2010 Toyota I force tows it like it's hardly back there. Last fall I towed it up to Ohio from Austin Texas to have some work done on it by Midget Trailer and...

Mystery Switch found outside OK I have another mystery switch this time the switch is located under the front of the lip of the top shell next to the left awning bracket. I have turned it on and off with my trailer unhooked but with 110 AC shore power plugged in but it doesnt seem to do...

sure you can I went one even farther and had Lippert ground control self stabilizing jacks put on my 31C all the way around. Now all i do is pull up to my spot and unhitch the trailer from the truck and the turn it on and push one button. Then stand back and in a minute or so it does everything...

did you even look at my old web site? www.trickmytrailmanor.com page 20 from the drop down menu at the top of the front page.... so it is the Dometic Sealand 711 M28C ....and make sure if you buy one that you get the "C" model (the "C" means center port, otherwise you will get the one made...

thanks thanks for your thoughts....and yes customizing is for everyone to make it your home away from home....you know I did the same thing with my old Trailmanor 3124 and I even documented it with a web site (www.trickmytrailmanor.com) which by the way I have given to a good friend/Trailmanor...

funny you should mention this I did something similar to my 31C...I took out the queen size bed and am using the nice memory foam mattress to fur bish the couch (which by the way is like sitting on a rack!) into a REAL comfy couch ..... then I removed the little night stand next to the bed and...

I took my 31C to the Spillar hitch shop here in Austin Tx to have 4 more outriggers installed, 2 in the far front and 2 more in the far rear. This way there will never be any sagging of the top shell ends on the existing outriggers which seems to be problematic with the longer HoLo's. I think...

I changed out my old water heater to a Suburban on demand one but still have the old one sitting around. It worked perfectly when I changed it out and you can have it if you'll pay the shipping. I don't know what that would be but if you like I'll find out and let you know. My e mail addy is...

on line and buy Maxxis tires...I think Discount Tires carries them as well......hey are the best and most reliable ...you will pay a little more but isn't peace of mind worth it not to mention the safety of your family?

my suggestion get the Blue Ox anti sway weight distribution hitch...mine saved my butt one trip when I had a blow out. The short of it was the tire blew at 70+MPH and hit the rim in a fraction of a second....however the Blue Ox kept every thing straight and true so I could make a safe and...

composite vs aluminum I have read more than one article about the composite pulley's falling apart as they age. I am sure aluminum would not do that and being less though than stainless steel would not have a bad affect on the cables either. I also think that aluminum would stand up longer...

Some one on here mentioned the fact that their pulleys were made of some composit material and that one had rotted and was coming apart. They said they were replacing them with aluminum pulleys that had brass bearings in the middle. Can anyone tell me the part numbers and where to purchase...

OK but what about the end part that takes the tension up? Those are pressed on so where do you get those and who puts them on the end of the cable?

Jack they are a bit pricey but you really can't put a price on the safety of you stuff especially your family! I like the fact that they are easy to replace the pads....I'm all about easy!!! Just about all of my mods lean this way....anything I can do to make my unit easier and quicker to set up...

my disc brakes from etrailer I got the Hydrastar actuator hba16, 2 Kodiac disc brake kits with the Dacromet rotors K2hr35d and the Hydrastar brake line kit Hs496-252 ....by the way these are all etrailer numbers :eek: TC

Bob, you were right! Mystery solved but also there are only 2 lights not 4 on my trailer, and the switch was where you said it would be. Thanks for your help! TC

Jack, it really wasn't a kit...I just contacted etrailer and told them what size wheels I had and what the brake assembly number was and they did the rest....I did however pick out the actuator as there are several on the market. TC

There are no dumb questions....only dumb answers....however, you are correct Jack, they are neither running lights or reflectors. They look just like the outside light by the door only there are 4 of them. One near each corner of my trailer, and they do contain bulbs. I just can't figure how to...

disc brakes are the best! :) Well if you really want to go deluxe make a complete change away from those dum...I mean drum brakes and get disc brakes like I did on my 31C. These are electric over hydraulic type that have an actuator that sends the fluid to the brake pads. No adjustments here...

I have a 2004 31C, and it has these exterior lights around the lower skirt, but for the life of me I can not find a switch to turn them on. I have an outside light by the door and a switch on the inside to turn that one light on but none of the ones on the lower skirt seem to work off of that...

Someone on here changed out their cables with stainless steel ones and I would like to know where they got them. I already have a line on aluminum pulleys so I'm good there. Please if you know where I can get some cables made let me know. thanks TC

RV Masters in Houston, Texas now services HiLo trailers (713 979 2146). I am going to have them replace my bag seal and cables and pulleys. Someone on here changed out their cables with stainless steel ones and I would like to know where they got them. I already have a line on aluminum pulleys...

need help :confused: rdkono .... I need to ask you a few questions about your old 31....I have a 3104C and there are some things I can not figure out. I will send you my phone number in a private message....thanks

I was at Home Depot and they have a whole section with these blinds over in the flooring dept...check them out

what do I use to maintain my aluminum roof....I know there is something that one can roll or paint onto the surface to protect the roof....