Search results
-
These are the bracket type supplied with the pro-series 30056 kit. Two are slanted and two straight.
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
making the bracket fit the bolt location. I actually removed the wrong bridge between holes and ended up removing the next inward bridge also. Measu
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
Finished hitch. You can see the 4 inches rear of wheel wells. The Bedrug was cut up and reinstalled in 3 pieces.
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
Hitch about 4 inches behind the axle. 28 inches from cab.
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
Left rear marked. A backing plate of 1/4 steel was fabricated for the second stud and inserted behind the large hole in the rail.
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
Left rear beacket installed. Each bracket was installed up against the bed-to-side joint weld interface. A 1-3/8 spacer between bracket and bed. Sto
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
Left front bracket installed. The position inside the frame rail for the bolt from the hitch rail is very limited by interferences. A fastening tab
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
Right rear bracket in place. Installing this bracket and the one on the left required bending an interfering flange toward the rear just hidden by th
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
Left front location marked
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
right front bracket in place
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
right rear location marked for drilling
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
Right front studs in place ready for bracket
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
Right wide view. You can see some of the limitations in locating the brackets. A clear set of locations 22 inches apart in all 4 locations is very li
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
Closeup of the finished hitch-up. The prior owner installed 2 grease-less plastic lubricating discs on the 5.0. They work fine. No rattling of the h
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
Finished rig
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
Pro Series 30056 hitch and rail package. RV5 extender on the 5.0. Tailgate easily lowers for hitching. Not sure if it would clear when turning.
- john o-ESC
- Media item
- Comments: 0
- Album: 2016 Canyon short bed and 5.0 classic rig
- Category: Escape Forum category
-
2016 Canyon short bed and 5.0 classic rig
We are setting up our Canyon Duramax for towing our new to us 5.0. Included are installation pictures.- john o-ESC
- Album
- Comments: 0
- Category: Escape Forum category
Try RV LIFE Pro Free for 7 Days
- Ad-Free experience on this RV LIFE Community.
- Plan the best RV Safe travel with RV LIFE Trip Wizard.
- Navigate with our RV Safe GPS mobile app.
- and much more...
