bolts

I will be replacing the leaf springs on my wolf pup, I haven’t taken anything apart yet and still waiting on parts to come in. I believe the eyes have nylon bushings, the question is, should these be greased or left to lubricate from the nylon alone? Edit I maybe completely wrong on their...

I have a 2018 31L5 coach. Just wondering if anyone has had to have these items replaced what they had to pay for it. I was quoted $4539. Is this a reasonable price? Thanks Bob

How are the 4 bolts for the seatbelts installed in the slide? I can see them from the bottom of the slide when extended. It looks like a round base T-Bolt from the bottom, but it seems more solid than that. Anyone have experience with them? I see other posts on the topic for other models, but...

Have a 36d7 and all of a sudden the bed started acting weird when going down. Found out many of the support bolts were coming loose which interfered with the lowering of the bed. Just a heads up to be sure they are tightened. Merry Christmas to everyone. Jimbo

i noticed that our microwave was dropping down, with a finger width gap between it and the bottom of the cabinet. I guess 17K miles of Western US highways caused the bolts to loosen over time. To fix, you’ll need to: Remove the upper cabinet door hardware and door Remove the back corner panel...

Hey y'all need some help! We are picking up a 2014 W&P 30MB and someone took the ramp door hasps off and have it closed with a bungee. We have new hasps but need to know the size and length of the carriage bolts and torx nuts. Thanks

My unit is a 2010 fws360. The driver side slide is the full wall driven by a equalizer hydraulic ram. The ram attaches to the bottom of the slide in the middle on the bottom. It had 6 bolts attaching a bracket to the underside of the slide! The two outside bolts are missing. This causes...

Looking to find out what these bolts are called on 2015 18ec. The fasteners that have a little Plastic washer. Torx pans head bolts. What are these things?

I’m having trouble finding the fasteners used in my 2015 work and play. Specifically the torx- pan head- 3/8” bolts with the little plastic washers. Some call them million mile bolts. Any idea what they are and where to get them?

Hello All. The latest episode of, "How quality sucks[emoji849]". This is the second time this has happened. I have a 2020 Rockwood 5vr Ultra light 29 foot 5th wheel. When I went to drop the front end of my 5th wheel at my camping site only one side would retract. The bolt on my landing...

Hi I’m not sure what form to join so I’m sending a private message. We are renovating a 40 foot toe trailer with to pop out. There was much more water damage then we anticipated. We are reframing the rotted wood at the back of the trailer. There are 2x4 on the floor that are rotted on both...

I can't find an answer anywhere and am hoping there might be help yet. We bought a used 2007 SV235RS and the bolts have sheared that hold the slide out frame to the trolly system. Has anyone else had this issue and has anyone been able to find replacement bolts with a part number? We are in...

Hi, I recently purchased a 2021 GeoPro 12srk and have used it for about 5-6 trips. All either in campgrounds or just off dirt roads. Yesterday after pulling the trailer to my destination I noticed the AC unit sitting sideways on the roof of the trailer. Upon further inspection I discovered ALL...

This may not be the right place for this, While doing some maintenance under my camper I noticed the nuts that connect the walls to the frame were loose, one about ready to fall off. Upon checking the rest all were loose some just barely finger tight. I tightened them all and used some lock...

I'm upgrading my equalizer and shackles and I'm having trouble seating the spline onto the rv hanger. I've tried hitting the bolt with a sledge hammer and still cannot get the splines to bite and seat properly. I ended up putting the nuts on at 40ft lb as recommended. Will this be an issue? I...

Does anyone know what these bolts belong to in the bedroom on a wildcat 295rsx? It is located on the opposite wall of the slide on the outside wall on the floor. Thanks Mike

This summer we did a 5,000+ miles trip from Ohio out west. After the trip when I was chocking the wheels at my storage site in Ohio I looked up and saw that a bolt holding the upper frame to the base had worked itself free and backed off over 1/2 inch. When I checked the rest of these bolts I...

Hey guys I’m pulling up the carpet in my Georgetown 350 so we can lay new vinyl plank flooring. Ive removed the couch and banquette and want to remove the seat belts as well. Two of them came out no problem but the others just keep spinning and spinning but never progress past the initial...

When can I purchase the slide-out cover plates that cover the bolts holding the slide-out brackets? I have a 2014 390FL.

While attempting to repair a stupid mistake I made (bent stabilizer jack), I noticed a nut and lick washer was loose on a bolt apparently connecting the camper sidewall to the frame. Since there is a lock washer between the nut and the frame, I assumed it should be tight. I checked along the...

I don't want to have to slide under there and find I don't have the right size wrenches to apply the CHF. Thanks, Jim.

We have a Reese sidewinder hitch for our 34 ft 5th wheel. We love the hitch performance ... BUT 1-2 bolts in the turret have broken (in half) EVERY year for the last 4 years! We have replaced the bolts, added comical washers and check them often and maintain the bolts at 45 lbs as instructed...

I was checking out the FR web site and noticed that under the XLR Thunderbolt section that only dealer stock was available in the floor plan section. Is this the end of the line for Thunderbolts? I was wondering where are all the Thunderbolts are how are the holding up? My unit has been doing...

I own a 2016 Coachman Clipper 17 FQ. I looked under my wheel wells and there are dents in the I-frame from the u bolts that hold the axle to the leaf springs that are hitting the frame and causing dents in the frame. The reason why I was looking was because the trailer is leaning 2 inches to the...

We are in the process of a reno and removed the captains chairs to lay new flooring. We were surprised that the bolts were not grade 8. I am seeing some recommendations for grade 5 and some for grade 8. Which should it be?