Well i'm finally getting around to hooking up a ford escape hybrid to the I3F.
I need 4 tire pressure cap sensors to hook the car up to the TST 770 series TPMS that came with the I3F. Unfortunately I seem to have lost the TST box that came with the RV.
Since I can't find the TST box, I'm not...
I'm considering purchasing a portable surge protector to be plugged into the outside electrical post. I can't find anywhere in the Xantrex 3000 watt inverter manual whether it has an internal AC surge protector before the transfer relay for incoming park ac power, and what it would be rated for...
As we are heading into cold weather, with some nights slated to drop below 32 degrees I was interested in any feedback from other Freedom Edition owners who have been using their RV in colder weather.
I'm not talking about trying to camp in colder climates, but how to deal with cold temps...
Installing a Winegard gateway 1000. No power on the leg (g/w) the other is white. Checked the fuses and found the fuse good but the light does not light when fuse is removed. All others do. I don't get a reading across the fuse posts. Is there something I need to do to power this circuit?
Is there a common 12V ground point in the 2024 Isata 3 Freedom. If so where is it located. I am adding a 12v circuit and would like to find a common point to use for ground.
Hi all, Im new here. Its nice to meet everyone. As I mentioned, I have a 2019 Rockwood Freedom Pop UP Camper. I have the stock USB port's beside the table. Both ports are dead/couldn't charge any newer devices at all). I want to replace them with newer USB C/USB Fast Charge/Quick Charge.
How...
Freedom Edition Owners - If you have the Truma Combi in Hot Water Mode on Boost Mix 2, how long does your hot water last when continuously running?
Please answer in the Poll above and comment if you like.
Our first few trips in the Freedom Edition have been either boondocking or electric...
Couple of things.
Shower head panel on wall is twisted.
Looks like double sided tape coming out.
Just want to confirm it's ok to grab that thing, pull it off tape, reorient it, and stick it back...
Also any way to tighten up the ball head? The showerhead only stays in place when the wand is...
Good afternoon everyone. We bought the trailer a year ago, it's a 2018 freedom express ultra light 192rbs. We did two trips so far from L.I. New York to North Carolina and just got back from upstate New York. I noticed when I was putting the cover over the tires that the passenger side of the...
Isata 3 Freedom Edition - Upgrades and Modifications Thread
I have been planning to start a thread to keep a list of Upgrades and Modifications for the Isata 3 Freedom Edition. Now that I have had a chance to start doing some upgrades and modifications, I thought I would post them to get this...
Hi everyone,
I'm looking for suggestions on how to properly reattach the bunk step in my Rockwood Freedom 1640LTD. Please see photos. The Step is plywood and was attached with 4 wood screws, but the slanted panel it was attached to is particle board, and there's not much distance (I'd say maybe...
Hello,
Does anyone know the actual differences between the Coachmen Freedom Express 204RD and 20SE? I've seen several comments like the following:
"The 20SE is the same floor plan as the 204RD, except a number of items have been stripped from it [20SE] so it can be sold at a lower price point...
This morning Battery #2 started having communication problems.
Note the I3 is not plugged into shore power for all steps below.
Here is the sequence of events:
1- Powered up I3 using red power on/off button by steps. SOC display showed both batteries fully charged @ 100%.
2- plugged in 7"...
Things have been working very well with our Freedom Edition with the exception that when on shore power and we were running the Air Con (A/C) if we lost shore power the A/C would shut off when everything switched to battery power. If we were running the A/C on battery and switched to shore...
We have a 2016 320bhds and it has been great up until recently.
Our "big slide" seems to be coming in significantly slower on one side than the other. It is a rack and pinion style slide. The side that comes in slower actually had the bracket that attaches the slide mechanism to the floor rip...
Ok, let me start by saying this is a rant. I'm frustrated and am not sure what I can do at this point. If you don't like rants you might want to move on. Like many of us that have an Isata 3 Freedom Edition I got the battery disconnect recall. It's a very simple recall, 30 minutes max...
Isata 3 Freedom Edition Owner Only - I thought it would be helpful to keep a questions and issues Log specifically related to the Xantrex eGen System (including FireFly).
This Log is intended for questions related to the Xantrex eGen system as well to document issues for Dynamax to...
To Isata 3 Freedom Edition Owners Only
I thought I would share this link in case any of you have not seen it yet. I found it a few weeks ago but revisited it again today after a few others posting on the Facebook site about some electronics / communication issues they experienced on the...
Hey fellow campers!
Finally upgraded to a much better PUP and we're pretty happy about it. The only thing I'm trying to figure out is the side panel(aluminum covering?) seems to be out of it's proper groove/placement. Anyone have any idea how to get this back where it belongs? Hopefully the...
Front driver side leveling jack took a hit on a v-shape driveway up in the mountains yesterday. Made a nasty sound during the hit. The whole assembly has about 2 in of play front to back. It's still extends and retracts okay but does have 2 in of slop.
Made an appointment with DeMartini this...
Has anyone seen or been given a procedure for bring a battery back online that went offline for an unknown reason? I have had to deal with this twice and the first procedure I use the first time did not work the second time.
Yes I have recovered both batteries and everything is working fine...