Door weather stripping pealed off in transit . . .

[thatguy-HILO]

Hello all! Upon return of my last camping trip (Flagstaff Cinders are awesome!) I noticed that the insulation surrounding the door had come near completely off. I pulled over and tucked it inside the camper however I need some advice on the best way to adhere it back. Any input is appreciated!

 

[sam-HILO]

Putting trim back.

DH says it is hard on the fingers. Bend the trim up into a u shape. The edges will slide in the edges of the metal. The tension holds it in. It might take a few tries,but persistence will pay off.

 

[thatguy-HILO]

Thanks Sam! I'm going to give it a go as soon as the temp drops a bit, crazy record heat over here

 

[MOSue]

Ours is just glued on. Ours was originally a peel and stick probably and we'll use a good grade of double stick tape or some Goop!