Hyrolr
New Member
Hi all:
We're relatively new to the world of Hi-Lo's but our son bought one last summer. What a great trailer! Since I help him maintain it, we've run into a problem and I'm hoping someone can help. While on the road last month returning from the Grand Canyon, we had a tire explode. Unfortunately, it was the right front tire on his 1997 26FB. The tread came off and tore out a piece of the trailer floor immediately to the rear of the entrance door. As some of you might already know, that's where the panel with all the switches is located. The rocker switch that raises and lowers the upper half was gone, and most of the wires that feed the other large rocker switch had been torn off. The other switches stayed in the panel but the wires have been torn off. We managed to trace the wires for raising and lowering the upper half so were able to finish the trip, but we had no 12V power to the trailer so had no lights except some battery operated camp lanterns. I've managed to find a wiring diagram here in the reference library that I think will help me get all the wires back in place and get the 12V system up and running again, but I still need some switches and the wooden switch plate to which they are mounted. I understand from a previous post that J&R no longer supplies parts, and so far, three e-mails to the people at the "official" Hi-Lo parts website have not been answered. We'd like to go out again, but with a big hole in the floor and a rat's nest of wires not connected to anything, we can't. I can't fix the hole in the floor until I get the wiring corrected. Any help you folks can offer will be greatly appreciated.
Thanks,
...............................Tim
We're relatively new to the world of Hi-Lo's but our son bought one last summer. What a great trailer! Since I help him maintain it, we've run into a problem and I'm hoping someone can help. While on the road last month returning from the Grand Canyon, we had a tire explode. Unfortunately, it was the right front tire on his 1997 26FB. The tread came off and tore out a piece of the trailer floor immediately to the rear of the entrance door. As some of you might already know, that's where the panel with all the switches is located. The rocker switch that raises and lowers the upper half was gone, and most of the wires that feed the other large rocker switch had been torn off. The other switches stayed in the panel but the wires have been torn off. We managed to trace the wires for raising and lowering the upper half so were able to finish the trip, but we had no 12V power to the trailer so had no lights except some battery operated camp lanterns. I've managed to find a wiring diagram here in the reference library that I think will help me get all the wires back in place and get the 12V system up and running again, but I still need some switches and the wooden switch plate to which they are mounted. I understand from a previous post that J&R no longer supplies parts, and so far, three e-mails to the people at the "official" Hi-Lo parts website have not been answered. We'd like to go out again, but with a big hole in the floor and a rat's nest of wires not connected to anything, we can't. I can't fix the hole in the floor until I get the wiring corrected. Any help you folks can offer will be greatly appreciated.
Thanks,
...............................Tim