Luke, I moved your post to its own thread in this area because it had no relationship to the thread it was in.
If you are asking, "When you pull antifreeze into the hot and cold lines, do you add until the antifreeze comes out of all faucets and the toilet valve?" - the answer is YES. This will guarantee that antifreeze is distributed throughout the plumbing and has gone into the "J-traps" below the sinks. You will be fully protected that way.
I also remove the drain plug from the hot water heater (7/8" socket on mine) so that the water tank is empty - then I reinstall the plug loosely to prevent spiders from entering.
Don't forget to tighten that plug next spring and move all winterizing valves to the correct "camping" positions again, when you flush out the antifreeze!
- Jack