controller

Anyone know where the slidout controller is located? Thanks

Hi - I have a 2019 Rockwood ESP 1970 popup. If I replace the 12V Deep Cycle batteries that they installed when I bought it with an AGM type battery, will the factory charger/controller work with it or will it need to be replaced? Thanks in advance, Keith

So I upgraded to lithium and looking at the manual for the batteries there isn’t a listing that says Absorption voltage. Is the manufacturer wording Absorption voltage as “Charging Limit Voltage” as shown in the picture? I see they list a float and equalizer setting but not a Absorption voltage...

hello, Can any1 tell me who makes this and where to get a replacement? One of the fittings got bent , when I tried to take it off it broke off inside. They all some kind of red thread sealant on them. Tried to easy out and it won't turn. Any help would be great. Thanks, Mike. Forest River...

This trip out seems my side cameras are not working, any ideas to troubleshoot? 2019 Isata 5 DS. I can’t find any literature on them in my manual data base. Thanks Casey

New owner here …. Bought and picked up our Cherokee 234DC last week (2022 leftover) our setup came with a Curt wireless brake controller. The co troller worked beautifully for our 2 hour ride home ….. today we took the Rv to show our families and I connected the brake controller and assured it...

Recently purchased a Rockwood Roo. The first row with it was fine and the brake controller worked as it should. Several days later, I came outside one night and noticed my trucks brake lights were on and the brake controller displayed PL. the truck was not hooked up to a trailer and had simply...

I am trying to locate the controller in my coach. Opened all the covers I can possibly but still can't find it. I am going to probably replace the motors for my slideout problem below. Would need the controller for the new motor re-sync...

Currently in the process of reworking the solar setup on my 2023 MiniLite 2109s. Installing a LiFePO4 battery, MPPT controller and DC charger. Also, In the process tidying up the wiring. As there are no available electrical drawings I've pieced together a pretty good picture on how things are...

I am trying to find out where the Jaboni Solar Controller is installed in my 2021 Freedom Express Ultrlite 259 travel trailer.

I just picked up my new SS-550 Badland. In trying to familiarize myself with the camper, I’m concerned my charge controller is incorrectly wired. There is nothing hooked to the “solar” input. I believe the wire hooked to the “battery” input might be the wires coming down from the solar panel...

2018 T21TBHW (same as Rockwood A122) 2018 Kia Sorento 6cyl AWD Brakes not activating. The brake controller in the tow vehicle checks out OK. All brake lights are working. Power is going from the tow vehicle to the brakes. BUT, the controller is not showing that the trailer is connected...

Can anyone tell me where the preinstalled wiring for the solar controller is located on a 2022 29VBUD? The brochure says it's behind a Go Power sticker that doesn't exist anywhere on my camper. :facepalm:

I have a brand new Forester Classic 3011DS and the PV is reversed on solar. I need to swap the positive and negative on the controller as the solar is not working. Does anyone know where the controller is located? ThankYou John

I own a FR3 2020 DS30 MH. I'm having a rear slide issue and need to locate the controller box unit. Anyone know where this controller is located? I haven't found it yet... Thanks for your help.

We have a 2021 Flagstaff Super lite 26FKBS. It says it is prewired for solar but what does that mean? It has both plug for panels on front passenger corner and on roof. Does anyone know if it has a built in solar controller somewhere? If so where? Or where do the wires go so you can connect...

so I just got my 2023 grey wolf 23mkbl and I am trying to replace the factory waaree solar controller with a renogy voyager controller I have and can not get the controller to recognize the factory waaree solar panels that are installed.I can hook the renogy panels up by the side box where the...

We just purchased a new 2023 Coachmen Class C 27QB with the new Chevy 6.6L gas engine. The chassis is a 2022 model year based on the Chevy 3500 cutaway. The coach came with an 8600# rated trailer hitch that has the 7-way and 4-way connectors wired to the back. I have owned a 3500 Express...

Just bought a new 2022 Silverado LT with the Factory Trailer Package. But GM doesn't have a Brake Controller as a part of that package! So...has anyone used the CURT 51180 Echo Wireless Electric Trailer Brake Controller? If so, please share what you think about it. Thanks!

I have an Epever MPPT 30A solar controller, model Tracer3210N. It's hooked between two Renorgy 100 watt panels and two Weize 100Ah LiFePO4 batteries. I got the Epever software and cable and reprogrammed the controller to charge these batteries, using the specs that came with them. I've left...

This is a question for all of you out there that own a Chevy/GMC 2500HD, and I would guess the 3500HD's with the OEM brake controller. I have a 2015 2500HD. Even with the gain set to 10 (max) I'm not happy with how the brakes are performing. When I press the manual level and the brakes go to...

Hey all, I’ve got a 2021 FR Wildwood 27RE. My slide outs work sometimes but pretty rarely. I’ve checked all the fuses and the wires running to the switches, everything looks good. I can’t figure out if this model has a slide out controller anywhere. Any help would really be appreciated.

If anyone has a 2022 Prime Time Tracer or similar that can help me wire this nonsense back up. I have no idea how this is supposed to go. If anyone can send me a picture of how theirs is wired I'd be so gratefully. We're cooking out here in this heat.

I've read many threads here discussing (arguing) the "requirement" for a panel disconnect for both the positive and negative panel leads to the SCC. Adding to that, whether a circuit breaker was necessary based on the current ratings of the panels. The threads always lead to my thinking that...

If I had a nickel for every time I've had either the step motor or controller replaced I'd have a quarter. This tale pertains to a 2006 Sunseeker 2860DS but other models and years might find this helpful. I had planned on replacing them both next spring because it's a pia to have either fail...