controller

We recently upgraded from a bumper pull Keystone to a 2021 Coachmen Fifth Wheel (brand new from dealer). We took it on a shake-down trip last weekend and I noticed that there is a waaree solar controller in the compartment by the battery and a solar panel on the roof. The controller is hooked to...

Greetings from Upstate NY:) My 2021 Catalina Trailblazer came with a solar package with 40 amp PWM controller already installed. By virtue of the product literature, the BT in the contoller part number and the bluetooth symbol displayed on the controller's LCD screen, the controller is...

Will the charging system on a 2017 MBS SunSeeker, charge a Lithium Iron Phosphate battery to its full potential (sorry about the pun, but the Lion Energy UT Safari 1300 batteries I am considering can accept a charge up to 14.6V), both off the vehicle's alternator and from shore power? Or would I...

My 2021 Sunseeker came with a GP-PWM-30-UL solar charge controller and a single 100w panel on roof. I had 2 other panels (2x100w) installed. In doing some battery monitoring, I noted the GP-PWM-30-UL had reading for 'battery 1' and 'battery 2' which my understanding it will charge Battery 2...

Where is the bedroom slide motor controller in a 3850 Hello: I have a 2014 Cardinal 3850 fifth wheel. Where is the bedroom slide motor controller located please? Thank you, Mike

Instead of hijacking another thread I thought I'd start this one. Wolf Pup 16PF with the Waree solar controller. When purchased I had the dealer install an extra battery (el cheapo Interstate flooded, but hey, gotta start somewhere) and an extra 50W solar panel. I figured this would get us...

I have a 2021 Geo Pro FBS. I was wondering if the factory installed Go Power solar controller is wired for 2 batteries. The controller is equipped to manage two batteries and I would like to add a second to the system.. Thanks?

Hi, I have 2 solar panels (Jaboni 100W; Renogy 200W), 2 PWM controllers (Jaboni 20A; Renogy 20A), and one Renogy LiFepo4 battery. I'd like to leverage both panels for charging. The Renogy controller supports LiFepo4; the Jaboni only has a jumper to remove "for wet cell batteries", therefore I...

My 2021 Rockwood 2608BS is prewired for Go Power solar panel (s) and controller. My question is, once I install the panel on the roof and plug it into the prewired connector, what wiring is behind the controller decal on the interior wall? Are there capped off cables there? What will I need...

Im gathering info to upgrade lead batteries to lithium iron battle born and solar charging. I have one battery and a portable folding solar panel. Saving up for another set to make the change out. What i dont know is whats jn my Shamrock right now and what i need to swap out. Converter and...

I just purchased a Freelander 22xg and want to replace the house battery with a 100ah lithium and not sure if the stock battery controller is lithium friendly. From some research it looks like I could put a stain on the alternator and not get a full battery charge if the stock system isn't set...

Hello We have a 2014 Vibe Vcross 6504. I am looking for the schwintech/lippert controller. I believe it is under the step to the queen bed but I can not figure out remove the step to access it. Anyone figure this out? Ty

We have a 191 rbs Nano and I can't find the slide out controller. The manual is useless.

Ok...not a debate on PWM or MPPT. I have a 30amp PWM controller for my 12v battery. The settings I have as of now are 14.1v PV off 11.6v load off 12.5v load on I don’t want to hurt the battery but also don’t want to leave money on the table....er..I mean I want to get the Max use of the...

I'm adding the Auto Leveler to my Alfa Wolf Limited. I was looking for the Unity Controller to plug into. Found it just dangling from wires in the wall behind the switches about 18 off the floor. What do you guys do to get to them. My only real option is to cut out under the bunk bed. I will...

Heading off on our first long trip soon and the only thing I’m not sure where to find on this camper is the slide controller. Not the control switch, but the electronic control module. Anyone know?

Hello, we have had our 2021 Rockwood Roo 21ss for about a month now and the learning curve has been steep! We had previously owned a TT but did not use anything except the interior lights and fans at times. We were told at the dealership that the 190 watt solar panel on the roof would take care...

Hi. I purchased a Surveyor Legend 202RBLE in April and am planning to take my first real trip soon. It has a solar panel and Go Power Solar controller. It's in outside storage and the 2 batteries are not being charged. The controller flashes between "Battery One" and Battery Two" and there is a...

I have a 2017 E450 chassis, does it have a brake controller already or do I need to add one. Thanks.

Just added additional solar to my 2020 GeoPro 19FD. I have a question on the Renogy Adventurer PWM ADV30-LI-G2-US controller and can't get up with those folks today. I have a simple, clean setup with the Renogy charge controller, one 210W 12V solar panel, two 6VDC Duracell golf cart batteries...

My project for today is to get my Tekonsha Primus IQ brake controller installed. I found the thread for finding the factory cable above the gas tank and see how others have routed through the firewall. IS this just as simple as connecting to each other? my wires from the controller and...

Looking to find the control panel for the lci remote control if anyone can help! Thanks.

I have a 2014 sunseeker 2650s. I am replacing the two 12v parallel sealed lead acid batteries with AGM. Do I need to adjust or replace the existing battery charge controller? I am going with 100ah Agm. Have not looked to see what the ah rating is on the two interstates.

The controller on my LCI Solera awning no longer works. I can’t get anyone near me to replace it. Has anyone replaced this controller on your own, and how difficult is it to replace. I can order one from eTrailer. Rich

I have a 2017 FR Cardinal Estate 3859RL. Does anybody know where I can find the Slide Controller? The slides went out with no issues or noises and now won’t go back in. Any help is appreciated!