fiberglass

I bought 2010 Georgetown XL 350TS new. In 2014 the soft vinyl ceiling was drooping. Contacted Forest River and it was agreed if I brought motorhome there they would replace Roof. I delivered motorhome to the factory in early fall 2014. Roof was replaced and motorhome was delivered to me in...

Hello, I have a 2013 Sunseeker with a fiberglass roof. I finally climbed up on the roof today to check the integrity of the seals around the roof vents, skylights, etc. I was surprised to see that screws were showing all around the perimeter of the fiberglass roof which were thru a trim piece...

I noticed 2 minor bumps today in the fiberglass right behind the propane tanks. The sun was hitting the fiberglass just right and I could see the surface was not even/smooth. Looks like something is sort of pushing on the inside in 2 spots causing slight outside raised surfaces, they spots are...

I am shopping for an RPOD and was told that they used to be made with gel-coated fiberglass siding, and are now stamped aluminum. When did this change? The one I am looking at is a 2015 and has the tann-ish siding with the frog on the lilly "pod", rather than the new green colors. Is that a...

TufPort - T60 SUPER CAPACITY Ideal for: Tradesman / Electrician/ Courier / Equipment Technician / Plumbers / Camper Conversion "With an interior height of 60", our T60 Super Capacity is the perfect size if you're looking to take your workshop on the road. With over 262 cubic feet of storage...

Hello and thank you for taking your time to read my post. I'm sure if I kept searching I might find the answer but I'm just going to ask everyone instead. My 2013 Sunseeker has a fiberglass roof I've noticed a small amount of moisture in the compartment of the upper bond above the driver Seat...

We currently have a 2014 Roo (233s) - looking to trade it in on a new one - really like the sapphire package. Can anyone tell me what "oyster fiberglass" is -or better yet - is this really an upgrade? We have had several delamination issues with our current model (which is why we are...

I'm looking to by a new TT and am looking at ones with & without front fiberglass cap. Should this be a priority to have? Is it worth it? Should I not give other TT's without one a chance?

Anyone has a bubble on the exterior of their fiberglass . Mine is a 2014 rockwood 8325ss. No water leaks etc. Dealer said they will make it good. Sent from my iPhone using Forest River Forums

I have a 2013 344QB that I bought new in February of 2013. The cap was faded by summer of 2014. Now the outdoor kitchen bunkhouse slide side has a 5 inch long deep crack running from the upper left-hand corner of the slide hole. I am at wits end. Anyone else have cracking?

What should I use to prep the roof? Acetone?

Went to get my TT from storage and found a large scrape on my siding from another TT that tried backing in next to me. Was able to remove all the light scuff marks with some Goo Gone and Magic Erasure pad, but where the other TT's rear side reflector scraped my unit, it left a red scrape about...

I was doing some routine checks of my rig and found what appears to be loose white fiberglass type insulation in my Onan genset. I opened the front cover and the insulation was sitting on time of the motor just inboard of the carb. Is this something Onan put there or did I have some field mice...

The very first post on the thread below, caused me a little concern. Note the picture on post #1, where the roof meets the cap. When re-did my Dicor a month ago, I put a bead down the molding/covers between the caps and roof, inside only. My concern then was of water getting under the cover...

Just looked on top of my 3010DS for the first time (making sure Maxxair II vent covers would be unimpeded before I ordered them) and was more than a little astonished to find that my fiberglass roof is really Marlite, gooped up with heavy caulk around all the vents and other rooftop miscellany...

A few months ago, we sold our TT. We have a 5-year plan to get another one. There is no way we will make it five years! :D Unemployment has slowed the process, but we are still looking/shopping/dreaming! ;) So the question of the moment is Aluminum or fiberglass for the outside walls? I...

I am just throwing this out there for discussion. I noted that at least 1 Class C manufacturer (Jayco) is constructing their cabover of solid 1 piece of fiberglass. It looks like Sunseeker is using a 2 piece design with a front fiberglass cap connected to the sidewall. Since the 1 piece...

Which have fiberglass roof and which have a TPO roof between Prism, Solera, Sunseeker and Forester MBS?

I was lubing the tracks of the kitchen slide this morning and to my surprise there was a nice crack in the fiberglass next to the track. It looks like it may line up with a motor when the slide is in. It is in line with the back window at the kitchen table. At the front track there are the same...

I have fiberglass siding and want to install an exterior TV mount, a Kebloc. It is approx. 3" wide and maybe 4" high and must be screwed on. How can I ensure where the aluminum studs are to secure the TV mount?

Have spoken to many RV body shops and they all agree that the problem is the fiberglass and not the paint. They call it "Cheaking" that was very common from 2002 to 2007 and was corrected in the manfactuing process. One person was very surprized when we told them it was a 2009 model. Have...

Found these cracks on the fiberglass roof of my Forester 2451S. Not too deep and just along one edge. Should I worry? Still under warranty.

Hey all, can anyone offer any suggestions/tips for drilling into the fiberglass on the outside of the trailer. Want to hang a tv mount on the side, just concerned about spider cracking in the fiberglass. Much appreciated for any info.

I email randy to make sure that I have a fiberglass roof on my MH 2014 360 QL . and he said that I did and just clean it with soap and water and keep up with the calking around all the vents and outside edges. but he did not say what else to do ! so what else do I need to do to keep it up...

I did exactly what I wanted to avoid - I chipped the exterior wall when installing shelving on the interior of the trailer.:crying: I carefully measured the length of the hollow-core door anchors in comparison to the gap between the interior and exterior walls. After installing one anchor I...