motor

I pick up motor home next Thursday. 2019 coachman 29ss. Anyone with any insight post away.

I literally just purchased a trailer and got rear ended on the way home. Fender was bent from impact and upon inspection, I notice the wheel is not centered. It is slightly bent outwards. Do I need to replace the entire axle? It’s a torsion axle don’t know if I’m able to just replace the torsion...

The bed slide will not go out. I hear the motor clicking so trying to access it. I assume it's under the bed itself. anyone know how to access the bed slide motor?

Hello I am trying to locate information on my slide out motor. The label is faded and no information can be gathered from it. Please see pics, if anyone can give me any information it would be greatly appreciated. Sorry if this is in the wring section. Model 23b Rockwood Roo

Last Wednesday we started our long Memorial Day camping trip at Pochantus state Park in Virginia. We extended the awning during our set up, and it seem a bit jerky. That evening, I tried to retract it and and it got about a foot and stopped. I ended up dragging the picknick table over to stand...

2023 Isata 5 28SS How does one remove the slide motor (failed-dead) when the side is all the way out. The Fascia is up against the interior wall blocking access to the motors. Would like to know how to access the 5/16’s side screw on the side of the motor and pop the motor up to allow the...

I have a 2014 Rockwood Mini Lite 2305s with a Airxcel Coleman Mach AC. The fan will not start unless given a nudge by hand and then it runs fine. I have replaced the Capacitor and still the same, I have also put a little oil on both side of the motor trying to add sum more lubrication to the...

Worth reading as some popular additives can do the opposite of their claims. https://www.motor1.com/news/719617/oil-additives-test/amp/#amp_tf=From%20%251%24s&aoh=17160908884728&csi=0&referrer=https%3A%2F%2Fwww.google.com

I have a 2022 Forrester 2401B MBS I believe the awning is about 13 ft long. Solera awning motor is shot. FR tech support provided a part number that doesn't match anything on the web. Will a motor #373566 be a good replacement. Looks like it will work.

Here's an issue that slipped past me on the PDI of our new 2024 Flagstaff MicroLite 21FBRS. We took the camper for it's maiden voyage this week and when putting the stab jacks down eagle-eye wifey notices something odd with the electrical wiring going into one of the stab jack motors. So I of...

Motorhome :: 2021 Forest River Sunseeker LE (2024-05-10 14:13:25)

I have a 2020 Rockwood signature 8328SB I need to replace one of the slide motors and I don’t know what kind of motor it is, can you tell me what model # so I can buy one to replace it.… help please

Needless to say, I've had a lot of issues with SlimRacks on two different motorhomes, two different brands, one of which is my Dynamax 5.

Hello, Looking to get a spare slide motor for my 2019 Isata 5 30FW. Does anyone know the Part Number? Never had an issue with my slide but wanted to carry a spare....or two. Thanks. :trink39:

took old motor off. Having issues finding a direct replacement. I need one that has the little gear attached. Some of the teeth are rounded down really bad. Motor 1820124 with 9 tooth pinion 214-1001. All the ones I have found on line dont have the small gear. Any help will be greatly...

After reading through some threads here I now realize there are problems with the large slide on the Isata 3 . Just curious what options I have to fix the problem. First - I always plug in and level before I attempt to operate the slide. This year I started having issues with the slide not...

Is a chauffeur's license required in your state to operate a Motorhome? Driving home with a friend in his Motorhome the subject came up about what states require a chauffeur License to operate an RV. I thought some would like to test their general knowledge on this free chauffeur driver test...

The grommet/strain relief for each motor of the stabilizer is dry rotting on me. Has anyone replaced the grommet, or successfully tried to use an RTV type sealant? I'd rather replace the grommet but can't find an exact copy. I did find the motors with cable on aliexpress for ~75 delivered...

A few of my friends are EV fanatics, and I have read a good deal about EVs. One friend had to rent an EV while on a business trip. But I'm more into a Hybrid thinking 70/30 might work. I've read in the future many parking garages will have to be designed or built to support weight issues with...

Just found that the rear motor of the bedroom slide wires a re broken. How can i replace the motor if I cannot move the slide out to remove the set screw. I looked online, but could find an answer. Also which motor is it? the 300:1 or 500:1? Thanks for anyones help

Curious is anyone has added Undercoating to their Class C Motorhomes. We have a new 2024 Leprechaun 319 MB. I was looking to add additional protection and reduce the noise levels if possible. Just looking to see if anyone out there has had this done and if it was worth the effort and expense...

I need suggestions on how to remove the gear box and slide motor on my 2001 Nitro XLR Toyhauler. I have taken out the screws, that should free the motor, but I cannot get it to move more that 1/4 inch.

I imagine this has been discussed before but a quick search didn't find much discussion - especially of more recent experiences. We've been TT people for 15+ years and I admit that as my birthdays accumulate my desire to have long days towing is dropping quickly. We've thought of getting a...

Hello folks, This question is for my 1998 Wildwood M-28FK. When I run the slide out, it will reach the full open and motor will continue to run even if the switch is released. I have had to push the "In" a few times to get it to stop. Is this a motor, stop sensor, switch issue or something...

So, I had the wonderful blessing of mice in my 2019 FR3. thank you through the waterlines, gas lines. I’ve replaced all these. I tried to pull in my bedroom, slide out and did not work. When I looked beside the bed, I found a bunch of chewed wires. I need to rewire the motor, but do not want to...