Another owner of a 2020 GT5 34H5 posted a pic on another forum today showing how his rear propane tank mounting bracket had partially cracked at the 90-degree bend in the bracket.
All other reports of cracked propane tank mounting brackets on roughly 2019 - 2023 Georgetowns were on the front...
Recently purchased a 2600KRB. While getting things set up we plugged a fan into the AC receptacle in the kitchen. The receptacle sunk back into the wall and the face plate fell off (see photos). From close examination, it does not appear to be fastened to a stud. The hole appears to be cut with...
I wanted to lighten up my Wolf Pup a bit, and get rid of the large folding cargo carrier frame that was bolted onto the rear bumper (which I never use), but needed something to carry the spare tire (which I needed last summer during a blowout and will never leave home without).
I passed up on a...
Anyway else noticing this with their setup? The "slider" as WS calls it, is wallowing out in the forward and reverse directions adding more slop to an already sloppy system. I have the 2.5" shank (wish they had 3" at the time of purchase) rated for 18,500lbs, which I have never exceeded...
All, I'm trying to reduce the clutter of electronic devices in the cab of our tow vehicle. I hard-wired power supply lines for my Furrion camera monitor and Garmin dash cam, eliminating those dangling wires. The dash cam is now behind the rear view mirror. It's basically invisible to the driver...
Hi - I have a 2017 Viking 17bh. I want to add a solar panel to it. I am thinking of mounting it towards the front of the camper, the front brackets would screw through the junction between the metal and the roof (there is a thicker aluminum piece there that is covered in “goop” sealant, which...
Hi all,
I am new to RV life with a GeoPro 19FBS. I want to be able to mount a TV to the outside rail that came on the trailer. You can mount a table and the griddle on it. I thought I would use it for an outside TV instead. Any ideas how? When I Google it I only find where people bolt the mount...
I have a 2019 Palomino SolAire 251RBSS. My question is it has 1 TV that is in a center console that’s swivels from the bedroom to the living room. Is there a way to mount a TV in both sides of the swivel so there is a TV in both places or is there another mounting location for an other TV?
I have a 2020 Geo Pro G19FD with factory installed 100W solar panel on the roof and a secondary 210W portable that I plug in to the side as needed. Each panel has its own MPPT charge controller and every thing works fine.
I added a Renogy Battery Monitor a few months back but don't like...
We have a brand new Apex Nano 187RB. Will the interior wall surface support a towel bar like I would do in 1/2" sheetrock using a molly bolt? Or must I find a metal stud? If I need to find a stud how do I do that? Are they 16 inches on center? The intent is to hold a towel, it's not a grab...
We just purchased a 2023 Alta 2600KRB. It did not come with a toilet paper holder or towel holder in the bathroom. I was going to start knocking on the walls to see if I could find either a frame member or part of the wall with a backer board. Any suggestions or ideas on where you have mounted...
So....I bought a really nice kitchen faucet to replace the plastic one with no sprayer. Hubby informed me there was no way to install it because in our Rockwood Mini Lite 2511s access to the bottom of the old faucet was not there. He stated he'd have a better chance if the sink was out. Well I...
Hi Everyone! New to the forum, great info here for our fellow travel trailer haulers. Wanted to post an issue I just ran across in our 2022 No Boundaries NB19.2 TT. I was giving the inside a thorough cleaning today prior to heading out next weekend. I attempted to pull one of the pedestal...
So we purchased our Rpod 192 a little over a year ago and I expect some level of issues with a new unit, but, our level of problems have been shocking. Where do I begin? Right off the bat, the trailer had no brakes and I had a scary trip down Chinook pass in WA state despite taking to the...
I have an f250 with the 6 3/4 bed and have a Pullrite super glide 2700 16,000lbs hitch. The current mounting system I have a super glide clean bed system with the ISR super rail system (IMAGE 1). The mounting rails are removeable but site about 2.5-3 inches above the bed of the truck, giving...
I have a 2023 R-Pod 196. Went to install my Furrion rear view camera today and there is no power to the mount. It works fine plugging into the in-vehicle power source but not when installed. I checked and all lights are on to the trailer but there is no power light on the camera when...
Well, I can’t seem to figure out how I’m going to mount a tv in my RV. The cable connection is only a couple of inches from my slideout when it is closed. It looks impossible to put a tv there. Any suggestions? It is an Aurora light 18BHS for an idea.
We have a 2012 Forester 3011DS with the over cab entertainment system. We want to change the mounting on the TV. The current fixed mount is two metal strips at the top and bottom, with 4 screws supporting the tv. We bought an RV specific mount from etrailer with articulating arm which would...
Hello , we cannot figure out how to remove our 50 inch TV from the front living room. The TV is so tight against the wall you cannot see behind it to see what kind of mount it's on. Any help would be greatly appreciated.
Hi all, new to the forum and RVing. I just purchased a new NoBo 20.3 and I have purchased a 200ah Lifepo4 battery for it. Eventually I want to move the battery inside, but for now I will need to keep it on the tongue. The cradle arms for the battery box is not wide enough for the lithium battery...
Looking to install a square (approx 24"x24") metal sheet to act as a ground plane for a GRMS antenna. The antenna has a magnetic base allowing me to "toss it up and yank it down" quickly.
Considering using pan-head screws and an adhesive to mount on a rear corner of the roof. Any...
I recently purchased a 2019 Rockwood A122S ESP pop-up camper. I noticed that some of the gas-strut mount screws are coming lose and the mount plate support the strut is coming unhinged.
The camper has fiberglass siding. Has anyone out there with similar camper type had any issues with this? How...
Just returned from a trip in the XL, during the trip my wife was telling me of a loud thumping in the floor every time the rear suspension would compress and rebound. Started digging into it tonight and found all four mounts within the rear wheel well snapped off. These appear to be the...