ram

Has anyone looked into putting this onto a pop up? I have a new pop up on order Flagstaff 280LTD and curious if it would be too much for the frame to handle. Looking to transport some bikes and already have a hitch mounted bike rack...

We decided to upgrade our Flagstaff 8528 TBWS to a 2021 8529 RLS. On the lot so can pick up next week. The salesman is suggesting we have a ceramic coating application put on. He’s not pushing it so kudos to him. Has anyone had this done and do you feel it’s worth it?

Hi! Is there a particular place I should attach a air compressor to blow out my AFrame Rockwood? I’ve taken the water heater plug out, opened the shower and the sink, and opened the water plug in the tank. Anything else I should do to make sure all water is out? I live in WY so we have some...

How often do you change your fuel filter? When I first got my truck at 28K miles, it now has 107K miles. I used to get 15K miles out of one as recommended by GM. Now I only get between 2,500-7,500 miles on one. Same fuel station and the filter does not look dirty.

Any place i can get wiring diagrams for a 21 DX3? Having trouble with rear tv, think i have a coax problem.

This is a newbie sort of question, I have a 2015 FR Hardside A128s. It has no waste water storage tank, I have drained the fresh water tank and blew air through the system. My question is why do I need to charge the system with antifreeze if there is no water to freeze? I must be missing...

Just wondering what you all are programming voltage to start the auto generator at?

So we have had problems with the switch on our a frame. The last time, last summer we were checking it out before going to the beach. The switch was dead. Called our local dealer ( 1 hour away) and he said part was back ordered. So we had to cancel trip and got no refund😩 We decided to sell...

Our FIC 3500 lb tongue jack has a temperamental switch, especially when in hot weather. Fortunately, more so for Down than Up, for cranking down is easier. I believe this is a mechanical rather than electrical problem as the switch might work if I press an outer corner of the switch. Before I...

Had anyone installed LED lights on the frame of their camper? I am looking to do this and was looking for advice. I figure I will wire them to the battery and install a toggle switch to power them. Just looking to see if that is the right way to go and if people have had problems with the...

Has anyone installed a frame mounted receiver on Clipper 17BH (or similar), such as Curt 13703? I want to mount my 50 lb portable generator on a rear rack...

Are you satisfied with the truck towing?

Can anyone provide a wiring schematic for the A frame (A212HW) roof extend/retract switch? I had a tire blowout which destroyed the plastic wheel well and tore out the wiring above it, including the roof switch. I need to start from scratch to locate which wire connects where and its source...

Our 2019 Forrest River Wildwood entry door is separating. It was always really hard to close and people would always ask us why, but we thought that’s just the way it was supposed to be. We should have known better because the door on the trailer we saw on the lot when we bought ours was already...

Hello! I have removed the majority of the existing bedframe which was a nightmare. I am left with this industrial bed frame motor which seems to be impact drilled into the floor and unmovable Any help is GREATLY APPRECIATED!!

While washing our 2020 Georgetown GT5 today I noticed the passenger side vent window in the bedroom moved. I went inside and confirmed the window was tightly closed. I removed the screen, opened the window, and realized I could move the outer pane of the dual pane windows independently of the...

I need help from the math wizzes to check my math on the size of sub-frame I need installed to bring my 5th wheel to level when towing. The 5th wheel sits nose high and I've done everything possible to make it level but have run out of adjustments. Pin box is as high as it can go, the hitch is...

After doing quite a bit of reading on forums and looking at specs for just about every portable generator 5kW and smaller, I pulled the trigger and ordered the Champion 2500W dual fuel generator. I figured it would be right on the edge for starting the 10kBTU CoolCat floor mounted a/c that...

Aframe :: 2019 Rockwood 214HW (2021-09-17 18:02:06)

When we picked up our brand new A-frame a couple of weeks ago, the dealer prep tech washed the outside and even cleaned the wheels and sprayed with tire polish. Aft of the wheels, the underside of the floor, the frame, and rear stabilizer jacks were caked with light brown mud. Somewhere post...

I've seen a few wiring diagrams's on this site for several different models. Does someone have one for the I5, "34DS"?

Brian sent me the attached wiring diagram for a 30FW although I have a 28ss which I am now trying to use to determine where a pair of wires should be connected. If you start on Page 2, top left, there is a green and white pair labeled 212 TPMS that are loose and bare in my G12 compartment...

Every camper and enclosed trailer I've owned has had issues with mice making their winter home inside my equipment. What is your experience with mice infiltrating your A frame pop up? Are there any known entry points that I can block off or other tips you can share to keep the critters at bay?

If anyone is using a RAM 2500 as a toad (4 down), I would be interested in hearing about your towing setup. TIA

How is everyone getting their rear ramp door to stay down when loading? When loading the ATV or cart, I need an extra person to hold the ramp to the ground or stand off the bike and do both. I took the railings off because we needed that extra couple inches to load the two ATvs. Thanks In...