replace

Hi, The door glass broke in my High Pointe EC028BMR Microwave/Convection Oven. Unfortunately, the manufacturer doesn't sell just the door or the glass. I've posted a "Wanted: Door from High Pointe EC028BMR Microwave" in the Parts forum, and I can buy an exact replacement for $270, but I'm...

I just finished replacing my Atwood GCH10A-3E with the newer version 4E. This is the 10 gallon tank with heat exchanger and electric element option. Since my original install (3E) the replacement tanks (4E) are wired differently. The old version had 3 wires running to the control panel to...

We have a 2016 Vista 36Y and wonder if anyone out there has replaced their front drivers and side window curtains with Day / Night Roller Shades. We do not like the curtains, but it appears the window / dash design might be a challenge. So open to any suggestions... Thank you for your time. Jim...

I’ve lost power on some of my 110 v outlets. I would like to change the breaker concerned. On a household breaker I just lever it out. Not sure on my View. Any advice Please?

Hi folks. I have a 2005 Voyage with factory ladder (made by TopLine manufacturing) attached to the back with rivets. While backing up, a tree branch hit the top of the ladder and the ladder is pretty bent now. Thankfully I stopped before hitting the coach, so the rest of the coach seems...

We just took our first trip in our Outlook 25j. It was only 2 nights to a campground about 40 miles from home. The cog had no hookups,so this was a good time to test the dry camping capabilities of our new used coach. When we got the 25j it had 3700 miles and 72 hours of generator use. After...

I have a 2004 Itasca 33V and it has a Shurflo 5900-0211 water pump. I do not think that it is working correctly. The water pressure is very low and if you turn on the water at two different faucets the you will just get a small amount of water. I can put my finger on the end of the pump...

I have Hella brand Low beams with one bulb out. Can anyone tell me how to remove and replace the bulb? Very hard to see in there.

I have a 2108DS micro mini and the bulb on my range hood burnt out. The bulb is black so I cannot read the number. There was a sticker that says 10 W bulb max. Can anybody please tell me the type of bulb I need For the light on the stove top range hood. Also would you advise that I replace us...

There's many threads on replacing the Norcold 1200, however in most cases the refrigerators mentioned as being used as replacement fridges are no longer available, and in most cases no model numbers for the fridges used are given. Most seem to be using a Samsung, however many say they're not all...

I have a 2018 Thor Freedom Elite 26he with the following floor plan https://www.freedom-motorhomes.com/freedom-elite/floor-plans/26he/ Our Jackknife couch is horribly uncomfortable. We'd love to replace it but the couch sits over the outside storage which takes up about half the space under...

The fireplace is a Classicflame 34HF600GRA, manufactured by Twin Star International. The flames are working okay, but the heat portion won't come on reliably via the thermostat, some times it does and some times it doesn't. Since I bought the RV used, I don't have the owners manual and can't...

Hope some one can help me. I have a 2000 adventure 35u on ford 550 super duty chassis. I had the dash up working on a vacuum problem and the dash fell down and the head light switch fell out. I need to replace the switch but cannot figure out how to get the rest of the switch assembly out of the...

On Thanksgiving, our Sharp convection/microwave unit went out. It got heavy use by my wife so not a surprise, given the age. My question: any suggestions for a similar replacement that is lighter than 71 pounds? I may have the shop drop it some to make more accessible to my 5'3" wife.

I'm looking to replace my Norcold N822RT refrigerator on my 2016 Aspect 32j. What are current Norcold models which would be suitable?

The LG television in our '16 Journey has got lines and needs replacing. Winnebago in its infinite wisdom fabricated the mounting plate in house and has port cutouts specific to a no longer available LG model. I did contact Winnebago and learned that for '17 they did a mod for mounting a Samsung...

Am strongly considering replacing the carpeting in my 2004 Itasca Meridian, and though the trend seems to be replacing carpeting with vinyl planks, we (aka "the Boss") have decided to stay with carpeting. My main concern is the dining slide - a 17 foot flat floor slide. As near as I can tell...

Air leveling valve leaking and can not get more the 50lbs of air pressure. Not such a big job the cost was $42 on ebay and $130 at freightliner. it takes about 1.5 hrs to complete, now all is good. Air pressure now up to 150 psi:)

How do u take off the headlight lens to replace the bulbs?

I changed the existing dome light that comes in the 22M to a LED version. Man what a difference. While I was behind the headliner, I ran an extension harness over to under the shelf over the side exit door and added another dome light there that also comes on when the main dome light comes...

We noticed on one of our slideouts the rubber is torn. I have looked in the parts catalog and looks like we can order it. Just wondering if this is a DIY-able project. ;)

I plan to replace the starter motor in my 1991 Elante. Chevrolet P30 chassis, 454 gas engine. The choice at Napa surprised me. They have a "performance" starter, rated at 2 Kilowatts for $230, or the standard starter, rated at 1.4 Kilowatts for $65. The price difference shocked me. Opinions?

I am generally very happy with my RV, but was very dissapointed at the low quality speakers in the outside entertainment system. It has 2 4x6" speakers, one of mine even had a terrible vibration at certain levels. Rather than have the dealer replace them with the same junk, I found a pair of...

The original owner of our new-to-us 2015 Winnebago Tribute had put Luxury Vinyl Plank (LVP) floating floor in the bedroom and bathroom of our coach over the original sheet vinyl (no slides involved). It looked really good but I had to pull up the entire LVP floor when a water pump leak spread...

Does anyone know of a manufacturer who uses the same wiring as the old Sony backup cameras did with the mini 4-pin connectors? If I purchase a new system, what are the odds of finding an adapter in order to continue to use the same wiring vs having to rewire it? Thanks in advance!