table

Just got our trailer delivered to us this week. We have the springfield pedestal with the sliding tabletop. It is full size table, as we have standard dinette, not u-shape. Tabletop is pretty wobbly. When sitting at it, if you lay arms on table, it tips a tad. There is that screw on bottom...

We're considering removing the booth in our 2670 to replace with a free standing table and chairs. This is an option if you order direct, but since we bought at a dealer with a steep discount we decided to just get the booth and remove it ourselves if we wanted. It's better than paying an...

I am documenting my individual build to share ideas. For all the posts that helped give me real life info, shared experiences & thoughtful innovation. I could better imagine my current needs. Initially I will show my roof solar panels. Some pics will post, others not. Materials ..... (Renogy)...

My daughter (8 years old) leaned on the edge of our dinette table with a bit too much of her weight and the applied torque ripped the screws out of the wood and splintered the floor a bit under one of the circular table footings. I have a couple of options to fix it: (1) I think the most...

Just purchased our "new to us" 2011 Fun Finder X series M-214WSD and looking forward to our first outing very soon. Everything seems to be in working order, however, the dinette table has a large crack across on of the sides. We are trying to find a replacement, but have yet to locate one...

We just got a new 2017 Aerolite 298RESL and I forgot to put the table extension back in when I closed the slide. When it stopped prematurely, I stopped to look and put it back out to fix the obstruction, but now the table is loose. Any ideas on how to get it tightened again? Thanks in advance.

When hubby and I were touring the showroom we decided we liked the (Hawk) side dinette more than the front dinette since it was nice to look out the side window while seated. But it seems most, if not all, of the dealer inventory builds we've seen online have the front dinette. I'm wondering...

Hi all, Wife and I finally decided to upgrade trailers. We've been very comfy in our 2004 Fleetwood Terry 250Rk for years, but even with good maintenance things break down... It was time we treated our hard working selves to some new amenities for some future glamping, so we started looking...

We have the u shaped dinette in a 21. The table is getting very wobbly. The screws are all still tight. The legs have just compressed too much on the ends over time. I tried banging them back out without much luck. Does anyone know of a solution? My wife and I work a lot at the table so if...

Hi all! I have a 2008 funfinder that came with a celano grill that fits on a rail on the side of the camper. We never ever use it, and I was thinking maybe I could build a table that uses that little black metal frame that came with the grill. How much weight do you think it could hold before...

I am trying to remove the dinette table in our 2014 Hallmark. I believe it should just lift up (the dinette can be made into a bed) but won't budge. The pole seems fixed in place and will not move up, down or rotate. I tried tapping on the pole with a soft hammer but that didn't loosen it. Any tips?

ironing board as an external table

I would like to order a replacement dinette table top for a 2015 Freedom Elite 28h / South Winds 28z. The coach is Olympic Cherry and Solar Sand design. Warning, the bed is not for adults! I set it up so my husband and I could snuggle up to watch a movie together and the top material broke...

I thought I would share my new table for my Ocelot with roll-over couch. I mounted the table on the cabinet in front of the water tank using oak mounts that allow the sliding cabinet door to slide behind them. The table sits on folding shelf brackets. I added a couple of braces to the inside...

Hey all, just completed a mod to my Hawk. I took out the stock single leg table which always seemed to be in the way and worst of all, not available when the dinette was in rollover bed mode. In short, I used black iron piping to create a swivel frame and mounted that to the FWC table. I would...

I replaced the factory dinette and chairs from my 2015 Cruiser 326RE. They are in great shape I just wanted something more flexible. Table is about 30" x 48" incl the drop leaf. Chairs are brown fabric. Located in North Alabama. Any interest?

Does anyone have a Dicor pedestal table without a raised floor? And if you do have the Dicor pedestal without a raised floor what is the table height? Thanks!

Table from my ATC Cougar measures 32"L x 16"W; set up height is 27". White Formica top with wood base; top, post & base come apart for storage in camper. Like new. Asking $50. I'm in the San Francisco Bay Area; may consider shipping. Call 415-456-9018.

We LOVE our 1977 Hi-Lo, and work on it all the time when not camping. We thought it would be a cool idea to attach brackets to the side of the camper and somehow fasten a homemade table to it. However I'm hesitant as the top shell has to slide down over whatever brackets we attach, but I do...

Hi. I posted an introductory email in the new members area. This is my first post asking for help. We just bought a 2008 T-291RL. It has a bracket - about 12 inches long - attached to the outside on the door-side of the unit. It looks to me like it is for some kind of table with a rabbited...

Table/desk installed with desk serface in up position.

This photo shows the desk surface in the up position.

This photo shows the desk surface in the down position.