Can't find 7 1/4 x 1 1/2 brake for 2182

BI

bilworth

Member
Joined
Dec 3, 2010
Messages
10
Location
Pearland, TX
I have a Hi Lo 1982 2182. The brake shoes need replacing and I need to replace one brake assembly. These brake drums have a 7 1/4 inch ID and the shoe width is 1 1/2 inches. All I have been able to find are 7 x 1 1/4; they do not work - won't fit!!

Does anyone have a suggestion as to where I may find the proper replacement? Alternatively, should I try to convert to the 7 x 1 1/4 or perhaps a 10 inch drum?
 
Do you know who made the axle as Hi-Lo used a couple of different brands over the years. Converting to a 10 inch would be ok but everything would have to be changed, would be a big expense. My 95 21 ft has KLO 10 inch brakes. The 2209 has Dexter 10 inch brakes.
 
Replies

Any idea on where I can find the maker of the axle? I have not gotten under the trailer to look for a stamp yet, but where I did look, I did not see anything. Dexter says on newer models that it is stamped on the right side, but mine is older. I also see no name on any of the brake parts.

I cannot get the brake shoes relined because the right rear brake was damaged and the shoes are somewhat bent as well as the adjustment screw is broken, so I need a complete assembly . (I did have my 1950 Plymouth shoes relined and was hoping I could do that with these.) I'm probably lucky I didn't have a problem with the right rear wheel on my last trip.
 
bilworth said:
I have a Hi Lo 1982 2182. The brake shoes need replacing and I need to replace one brake assembly. These brake drums have a 7 1/4 inch ID and the shoe width is 1 1/2 inches. All I have been able to find are 7 x 1 1/4; they do not work - won't fit!!

Does anyone have a suggestion as to where I may find the proper replacement? Alternatively, should I try to convert to the 7 x 1 1/4 or perhaps a 10 inch drum?
Click to expand...

Another option that might work would be to check with the folks at the following website:

Trailer hitch, hitches and bike rack (800)298-8924

They specialize in trailer parts including brakes, axles and bearings! Good Luck!
 
Last edited:
Oh No

I contacted J&R with my axle and hub info. I have a Fayette axle which no longer are made. He stated that they had a similar problem in the past and could find no replacement parts for the Fayette. I also found some posts from a few years ago where some people with Hi Lo's from around '79 to '82 had the same problem I'm having. Unfortunately, no solution was posted. I've got some thinking to do. Sounds like $$$ to me.
 
bilworth said:
I contacted J&R with my axle and hub info. I have a Fayette axle which no longer are made. He stated that they had a similar problem in the past and could find no replacement parts for the Fayette. I also found some posts from a few years ago where some people with Hi Lo's from around '79 to '82 had the same problem I'm having. Unfortunately, no solution was posted. I've got some thinking to do. Sounds like $$$ to me.
Click to expand...

The closest I could find was 7 X 1 /14.

http://www.sahararv.com/pdfs/761-771_Husky_RunningGear.pdf
 
Brake Parts

Do a search for junkyards with hilo parts. You could also look at websites selling hilos. Seems to me iremember reading of a hi lo for sale 70s model.
 
My solution $$

I replaced the 2000 lb axles with 3500 lb axles with 10" electric brakes. I just finished today. I took it on a test drive and everything seemed to be working just fine. This solution cost about $550, but a friend and I did the labor. It's not all that hard to replace the axles.
 
You must log in or register to reply here.

New posts

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top