WTB: Bunk Assembly

N00Btravel

Member
Joined
Jan 20, 2023
Messages
26
Location
NJ
As per the title, looking for the bunk bed hardware for the Hi-Lo.

I've been looking for a Hi-Lo with a bunk but it seems many either don't have them, or have removed them. So now I'm looking for the hardware so that I can consider some of the ones that don't have the bunk.
 
As far as I know, N00B, the hardware for the bunk is identical for all models of HiLo.

- Jack
 
Cool! You can probably make a stronger bunk frame than the OEM one too!

- Jack

I would but…as you taught me, tongue weight!
The bunk is going to hold (2) small children who weigh less than 100lbs combined. So it doesn’t need to be that strong. Just strong enough that DIFUS doesn’t get called.
 
Oh, that's good. I was thinking your kids were older. We put our Grandkids, probably about the same weight up there and they were fine. They slept "top to tail" (heads at opposite ends). I made a kind of "fence" out of PVC that was about 3 ft wide to keep the one on the outer side from falling out. It just fit over the frame there and it worked very well.

- Jack
 
Oh, that's good. I was thinking your kids were older. We put our Grandkids, probably about the same weight up there and they were fine. They slept "top to tail" (heads at opposite ends). I made a kind of "fence" out of PVC that was about 3 ft wide to keep the one on the outer side from falling out. It just fit over the frame there and it worked very well.

- Jack

That’s pretty much the plan. If we can get the bunk then it saves us from having to make up too many surfaces. We can leave the bunk down, dinette in bed mode and put a table in front of the tip out couch.
 

New posts

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top